Infinity interaktiv allt-i-ett-projektor

The Infinity Interactive All-In-One Projector – Floor, Wall & Immersive Games (3200–4500 Lumens) ranges from $2,888.88 to $4,388.88, depending on the option selected.

The Infinity Interactive All-In-One Projector – Floor, Wall & Immersive Games (3200–4500 Lumens) carries a IP54 ingress-protection rating.

The Infinity Interactive All-In-One Projector – Floor, Wall & Immersive Games (3200–4500 Lumens): Built into the fixture housing — plug into any standard outlet, nothing extra to buy. AC 100-240V.

Plug-in (standard) — hardwired to a remote transformer is available for permanent/architectural installs, see our Plug-In vs. Hardwired guide

The Infinity Interactive All-In-One Projector – Floor, Wall & Immersive Games (3200–4500 Lumens) is rated for operation from −20°C to 60°C (−4°F to 140°F).

The Infinity Interactive All-In-One Projector – Floor, Wall & Immersive Games (3200–4500 Lumens) uses a LED light engine, rated for 20,000 hours of life.

Very little. Keep the projector and the sensor dusted and leave the vents clear so it can cool. The 4500-lumen model uses a laser light source, so there is no bulb to replace.

Yes. The rear panel has an RS-232C port for control systems, and the projector also comes with its own remote and an Android remote for choosing games.

Yes. It can be set to power on and start as soon as AC power is restored, so it can run from a wall switch or timer and comes back on its own after an outage.

The native resolution is 1024 × 768, and it accepts signals up to 1920 × 1080.

HDMI, VGA in, composite video in, USB-B, an RS-232C control port and the AC power inlet (100–240V).

For floor games the projector mounts on the ceiling and projects down onto the play area. Every room is different, so send us a photo of the space and the ceiling height and we will recommend exactly where to mount the projector and the sensor.

Interactive projectors use sensors to create engaging floor or wall experiences. They respond to movement, touch, or gestures, making them popular in entertainment, education, and hospitality.

We offer All-In-One Interactive Projectors with 45+ games, and Floor Master Interactive Projectors with radar sensors and 80+ games. Both are designed for retail, hospitality, museums, and educational use.

Wall-based interactive projectors can sit on a table and project onto a wall directly. Floor-based models usually require ceiling or elevated mounting to project downwards.

Camera sensors track visible movement but can be affected by lighting conditions. Radar sensors use infrared waves, making them more accurate and reliable in various environments.

Yes. They create unique entertainment experiences for guests. Examples include interactive games for children in family restaurants or immersive visuals for bars and lounges.

Yes. Hotels and resorts use them in lobbies, kids’ clubs, and event spaces to create memorable guest experiences.

Yes. Museums use them for interactive exhibits that engage visitors with playful and educational content.

Projection size depends on the distance. For example, the Floor Master projects up to 45 inches at shorter throws. Larger projection areas can be achieved with ceiling-mounted setups.

Yes. You can load your own games and branded content. Games need to be built in Unity and read movement through the TUIO protocol. In short: build the game in Unity, read touches through TUIO, test it on a computer with a TUIO simulator, export it for the projector's built-in system, then install it and line the sensor up with your floor or wall.

Making or loading a custom game is not included in the projector price and is not a free service right now; today it's handled case by case and quoted per project. We're working to make the process simpler and plan to offer custom games as a standard service in the future. Tell us what you'd like.

Yes. Both All-In-One and Floor Master models include dozens of interactive games preloaded for immediate use.

Yes. They can be set to cycle through games or remain on a specific one, depending on your preference.

Yes. Most models include a remote for quick adjustments and navigation.

One remote per projector. Each projector ships with its own remote, and each remote is meant for its own unit. Don't use one remote to run several projectors: our standard remotes all send the same signal, so pointing one at several projectors mounted close together causes interference and the projectors respond erratically. Installing several units close together? Ask for custom-coded remotes when you order (additional fee) so each remote controls only its own projector.

Mounting hardware and installation accessories are typically included, especially with floor models. Additional accessories can be ordered if needed.

Yes. HDMI input is supported, allowing connection to external devices if required.

Yes. Schools and learning centers use them for interactive lessons, games, and activities that encourage participation.

Restaurants, bars, hotels, museums, retail stores, and family entertainment centers all benefit from interactive projectors. They increase engagement and create memorable experiences ∞.

Like other projectors, they have cooling fans. The noise is minimal and not disruptive in typical environments.

Yes. With PayPal Pay Later, businesses can spread the cost of interactive projectors, making it easier to budget for installations.

Two add-ons: an Outdoor Waterproof Timer that switches your projectors on and off on a weekly schedule (an electrician wires it in, and outdoors it sits inside a weatherproof enclosure), and an IP66 Waterproof Switch Cover that protects your outdoor power connection. Each is $88.88 and can be added right on the projector page.

Open any eligible projector, scroll to the "Outdoor accessories" section under the configurator, and tap Add. The price is included in your total and the accessory ships and installs with your projector.

The Outdoor Waterproof Timer works with every Infinity projector. The Waterproof Switch Cover is offered on outdoor/weatherproof models, where it is most useful.

Projection advertising is using projected light — usually a logo, message, or pattern from a gobo projector — as signage and marketing on floors, walls, sidewalks, and buildings. Instead of printing or building a physical sign, you cast the message in light: it installs in minutes with no construction, glows in a way flat signage can't, and the content swaps in seconds by changing a gobo disc. Businesses use it for storefront logos, event branding, sponsor walls, safety messaging, and seasonal promotions. It's at its best at night and indoors — like all projection, it washes out in direct daylight.

On your own property — your entryway, patio, interior floors and walls — you generally don't need a permit; it's your light on your surface. Public sidewalks and streets vary by city: some treat a projected logo as signage under the local sign ordinance, while many don't address projection at all. The practical playbook: aim from your own property, keep the projection tasteful and non-blinding, and check with your city's zoning or sign office before making a public-sidewalk projection permanent. And because it's only light, you can always reposition it in minutes — no repainting, no removal costs.

Only with the owner's permission. Even though projection leaves no mark, casting your branding on a building you don't own or lease can be treated as unauthorized advertising and can draw complaints or fines. The good news: permission is often easy to get — for events, partnerships, or a great shared wall, many owners will happily approve a beautiful projection. Get it in writing and agree on hours, and you're set. On your own building, project away — that's exactly what these are built for.

For most businesses, the gobo projector wins long-term. A neon or channel-letter sign is a permanent facade project — fabrication, installation, electrical work, often a sign permit — and the design is fixed forever. A gobo projector is one fixture you mount and plug in: no facade work, and when your logo or promotion changes you swap a gobo disc instead of commissioning a new sign. With LED engines rated up to 50,000 hours and electricity costs of pennies a night, the ongoing cost is minimal. The honest trade-off: projection is light, so it shines at night and in dim settings, while a physical sign stays visible in bright daylight.

For most storefront businesses, yes — it's one of the least expensive ways to get a lit, eye-catching sign. You pay once for the fixture, electricity runs pennies a night, and your first artwork is included: every Infinity gobo projector comes with two free full-color custom gobos, a free remote, and free shipping. When you rebrand or run a promotion, you swap a disc instead of buying a new sign. The honest fit-check: projection earns its keep for evening-traffic businesses — restaurants, bars, salons, venues, late-open retail. If all your traffic comes in bright midday sun, a projection won't be visible when it matters most.

Shipping is free on every projector — the price you see is the price to your door, and the two free full-color gobos ride along at no charge. The one exception is a standalone custom gobo order (gobos ordered without a projector): shipping is a flat $50, and standard turnaround is 1–2 weeks. Need them sooner? Rush (5–7 days) is +$30. Also worth knowing before you order: custom items are made to your artwork, so they're non-refundable — which is why we proof your design with you before anything is produced.

Yes — we run a formal price-match program: if you find a comparable gobo projector for less, submit a price-match request from the "Found it cheaper?" link on any product page and we'll match the price. Your matched price still includes everything every Infinity projector comes with — free shipping, two free full-color custom gobos, and a free remote — so the matched number is the complete number, not a base price with add-ons waiting.

A wedding monogram projection is the couple's initials, names, or wedding date cast in light onto the dance floor or wall — created by a gobo projector shining through a custom glass gobo of the design. Size follows the lens math: with our standard 0.33 lens, a projector mounted 15 feet up makes a monogram about 5 feet across — a beautiful scale for a typical dance floor. And unlike rented lighting, a purchased projector is yours after the big day: swap the gobo and the same fixture becomes a business logo light or home décor. Every Infinity gobo projector includes two free full-color custom gobos — your monogram can be the first.

The games are built in Unity, a widely used game engine, and read movement through TUIO, the open standard for touch and motion on interactive surfaces. The sensor (built-in camera or optional radar) sends each step, tap or ball hit to the game as a TUIO touch.

Every projector ships with its game library preloaded: 45+ floor and wall games on the All-in-One and 80+ on the Mobile Laser Tower. You can also load your own Unity games, but making or loading a custom game is not included in the projector price.

Open any product page and use "Get project pricing" (it appears from 50 units), or send the quote form on our contact page with the models, quantities and sites. We price the whole rollout, and a quoted project keeps its quoted prices.

Yes, free of charge. Send a floor plan, photos or the run lengths, and we draw where each unit mounts, what it covers and how many you need, before you order. It works for a warehouse aisle plan, a storefront chain or a campus.