The Infinity Red Block Arrow Laser Warning Light projects a short, solid red arrow onto the floor beside or ahead of an AGV, autonomous forklift or pallet truck. It is a compact sign that people on foot read in an instant: the vehicle is headed that way.
One high-brightness red laser (100 mW) projects a filled block arrow. Where a long arrow traces a path, a block arrow reads like a road sign — short, bold and easy to spot at a glance from the side of an aisle.
Prefer a long, slim arrow, or need green? The Arrow Laser uses the same head and power and comes in red or green.
A block arrow on the floor beside a driverless truck shows people which way it is about to turn off or travel.
Warn pickers at rack ends which way the truck is coming, without adding another beeper.
A short arrow stays on the floor close to the vehicle, so it reads clearly in narrow spaces.
Mounted on a wall or column with a 12/24 V supply, a fixed arrow points traffic the right way.
Power: 12 or 24 V DC. These arrow lasers are rated for 12/24 V DC. Many electric forklifts and reach trucks run on 36, 48 or 80 V, so check your vehicle’s voltage first. If it is higher than 24 V, ask us before you order, or look at our circle, arch and SafeGuide line lasers, which wire straight into DC 10–80 V. A fixed install on a wall or column needs a 12 or 24 V DC power supply.
Size and mounting. The head is tiny: 50 mm long, 33 mm wide across the side screws and 35 mm high on its bracket (2.0 × 1.3 × 1.4 in), with a barrel 18.3 mm (0.72 in) across. The bracket has two 3.5 mm mounting holes 10 mm (0.39 in) apart, and the side screws let you tilt the head to aim the arrow. Mount it above head height on the vehicle and aim it at the floor in front of, or beside, the direction of travel.
It is rated IP65 (dust-tight and protected against water jets) and operates from -30°C to 55°C (-22°F to 131°F).
Block arrow or slim arrow? This projects a short, solid block arrow in red. The Arrow Laser projects a long, slim arrow in red or green. Both share the same head, the same 12/24 V DC power and the same IP65 rating.
An arrow shows direction. To mark the space around a vehicle, use the circle or arch laser. To mark a lane edge or boundary, use a SafeGuide line. For a zone that turns red when someone walks up, see the Forklift Safety Zone System.
Red only. For a green arrow, choose the .
Check your voltage. This is a 12/24 V DC light. If your vehicles run higher, ask us first.
Lower output than the 10–80 V lasers. Its laser is 100 mW red; the circle, arch and SafeGuide line lasers run 700 mW red.
Eye safety. A laser projector is for floors, not for people. Mount it above head height, aim it down at the floor, and never point it at a person, a driver’s seat, a road or a flight path. Tighten the bracket so a bump from a pallet or a door cannot swing the beam into a new aim, and re-check the aim after any collision or maintenance.
Keeping it sharp. Dust and exhaust film the front lens over time. Wipe it with a dry microfiber cloth; if it needs more, dampen the cloth with water only.
Turnaround. Delivers in 2–3 weeks.
Power draw, weight, arrow size by mounting height and warranty terms are not on the datasheet — ask us if your install needs them.
Give Rating
Your Review
Drag and drop your media files here, or click to upload — up to 5 files, 50MB each
Company Name (optional)
Your Name
Your Email
Not published — we only use it to confirm your order and reply to you.
